*Please call us to order

Charge your EV the easy way with the BCP Smart 22kW EV Wall Charger. Designed for both **single-phase and three-phase installations**, this smart charger delivers fast, reliable charging at home or in the workplace while offering advanced safety and energy management features.

• The permanently attached 6-metre Type 2 charging cable means you’ll never have to unpack or carry a separate charging lead again—simply plug in and charge your Type 2 EV/PHEV.

Key Features:

• Compatible with both single-phase and three-phase power.
• Adjustable charging current from 6A to 32A.
  • Adjustable output from 6 Amp – 32 Amp, the 22kW BCP Wall Charger can be either wall-mounted or pile mounted. Features a Type 2 lead permanently attached suitable for Type 2 (ex-UK/NZ new) EV/PHEV.  You can use single or three phase power and access solar supply. EV Charging is super easy with a tethered cable, no more hunting around for your Type 2 charging lead.
• Delivers up to 22kW charging (three-phase installation).
• Permanently attached 6m Type 2 charging cable.
• Suitable for all Type 2 electric vehicles and plug-in hybrids.
• Can be wall-mounted or pedestal (pile) mounted.
• Smart charging control via the Z-Box app.
• Supports optional solar charging when paired with the compatible Solar DLB Box.
• Built-in 6mA DC residual current detection. A separate Type B RCD is generally not required. Installation must still include the appropriate protection devices specified by New Zealand electrical regulations, including an isolation switch and suitable RCBO as determined by your licensed electrician.
• Weather-resistant design for indoor and outdoor installations.
• RFID swipecards (included) allows only authorised users to gain access to the charger.

Dynamic Load Balancing (DLB)

• The BCP Smart Charger features Dynamic Load Balancing (DLB), which intelligently monitors your home’s electrical demand and automatically adjusts the charging current to help prevent overloading your electrical supply.
• Simply set your property’s maximum available current in the Z-Box smartphone app, and the charger will dynamically increase or decrease the charging rate as household power usage changes.
• For example, if your property has a 63A supply and your household is using 45A, the charger will automatically reduce charging to approximately 18A, helping ensure your home’s electrical capacity isn’t exceeded.

Z-Box App for real-time data interface – view charging data, set charging current, voltage and max charging power.

• Choose correct DLB mode for solar (optional)
• Set weekly charging reservation
• Z-Box App for real-time data interface – view charging data, set charging current, voltage and max charging power.
• Connect via bluetooth or wifi
• Set charging timer
• Choose correct DLB mode for solar (optional) – requires purchase of Solar DLB box (extra cost)
• Set weekly charging reservation

Download here from the Google Play Store

What’s in the Box

• BCP Smart 22kW EV Wall Charger
• Permanently attached 6m Type 2 charging cable
• Installation instructions

Whether you’re charging at home, at work, or preparing for future EV upgrades, the BCP Smart Wall Charger provides a convenient, intelligent and reliable charging solution backed by the features modern EV owners expect.

IMPORTANT: Electrician will need to wire in an isolation switch and supply RCBO at your switch board.

• This product must be installed by a registered, qualified electrician. Please refer to our T&C’s.
• Always ask a qualified electrician to check the wiring of your home before charging any EV/PHEV using your domestic circuits.
• If the installation of the EV Power Wall Charger is not correct then some features of the charger or app may not work properly.
• There should be no components left in the box as all parts are required to ensure safety and proper function!
• SDoC available contact us for a copy.

Connecting multiple leads (end to end) together in order to extend the reach is dangerous. This is known as “daisy chaining” and will not charge your car.

Compatibility:

• Compatible with all Type 2 EVs/PHEVs.
• If you don’t know what Type your EV or PHEV is please call us. An easy way to tell is to compare the charging port on your vehicle with the picture of a Type 2 port below.

Specifications:

• 7kg
• 380mm Hx 169mm W x 201/159 mm D
• 3 phase or single phase.
• Built-in over-voltage and under-voltage protection(U>264V or U<187V)
• Over- current protection, over temperature protection, imperfect earth detection.
• CP abnormal signal protection and type A + DC 6mA for Europe standard.
• Operating temperature range: -25 ℃ ~ +55 ℃.
• IP65 (socket IP55) protection rate – provide shelter recommended.
• Operating humidity range 0-95% for indoor and outdoor.
• Temperature sensor built-in for fire protection.
• Leakage test function (to ensure the normal operation of leakage protection).
• Automatic reset after troubleshooting. That means when a charger stops working when an anomaly is detected, the charger will periodically self- check whether the anomaly is eliminated. The charger will start to work automatically after ensure the anomaly has been eliminated.
• The ramp-down stop current charging mode protects the EV batteries.
• Rated charging current can be set according to different home load conditions.
• Lightning protection to ensure personal safety.
• Standard: EN IEC 61851-1:2019 IEC 61851-1:2017 IEC62955
• Certificate: CE/CB/UKCA/SAA

Warranty

3 year warranty